Today, I will give you some tips on how to save fuel for excavators. Tip 1: Dont use ineffective actions, where you need to dig Doing ineffective actions will waste a lot of oil. It is necessary to design the construction method according t

One light: When the loader is working, the heel is pressed against the floor of the cab, the foot plate and the accelerator pedal are kept parallel, and the gas pedal is gently pressed down. Second stability: When the loader is working, the

1. Cylindrical roller 2. Grid roller 3. Pneumatic roller 4. Vibratory roller

Excavators, also known as backhoes, are earth-moving machines that use a bucket to excavate material above or below a support surface, load it into a transport vehicle or unload it to a yard.

When lifting heavy objects, the speed should be uniform and stable to maintain the stability of the body and prevent the center of gravity from tilting. It is strictly forbidden to drop the hanging objects freely. No maintenance work shall

Scientifically determining the interval mileage of various maintenance operations can not only keep the concrete mixer in good technical condition, but also save you maintenance costs and repair costs.

Walk-behind road rollers are road rollers that are supported by both hands for compaction. They are classified into walk-behind single-wheel road rollers and walk-behind double-wheel road rollers. They have the advantages of convenient opera

Precautions for daily construction and maintenance of road rollers 1. Before working, check the parts, pipelines, screws, belts, lights and three fluids according to the maintenance content, check the sprinkler system with double steel whee

The choice of the press is not only related to the quality of the construction, but also to the progress of the construction. So what kind of road roller is good? Next, I will share with you the selection of the type and tonnage of the road

Since the road roller is a special vehicle, the operator should receive the training and leadership of the manufacturer, have sufficient knowledge of the structure and performance of the machine, and obtain certain operation and maintenance